Please Contact Us to Order to offer best price and delivery time for Erichsen - NO. 4 - 4,1 mm number, also you may ask some other model number is well. We can offer best price, and delivery time with wide products distribution network in United States Industrial products Market.
WE SELL ONLY ORIGINAL AND NEW PRODUCTS!
Our company is not an authorized distributor and manufacturer's representative of the brands shown on the website. Private brand names shown on this site and trademarks are the property of their respective owners
Important note: Although we Erichsen - Products are Onrion LLC not an authorized dealer. All rights are reserved by the manufacturers and their official partners.
Where can I buy NO. 4 - 4,1 mm by Erichsen in United States?
You can purchase NO. 4 - 4,1 mm by Erichsen from Onrion LLC. We serve customers across United States, offering competitive prices and reliable service.
What is the price of the NO. 4 - 4,1 mm?
For customized pricing and availability, please fill out our contact form or give us a call. We are dedicated to providing solutions that align with your specific requirements.
Who is the official distributor or seller of Erichsen in United States?
While we are not the official distributor or seller of Erichsen in United States, we source our products from reliable channels and offer you original Erichsen equipment at competitive prices.
How can I access NO. 4 - 4,1 mm catalogs, user manuals, technical documents, and PDFs?
You can access catalogs, user manuals, and technical documents for NO. 4 - 4,1 mm on our website. Visit our resources section or contact us directly for specific documents.
Do you provide technical support for NO. 4 - 4,1 mm?
While we do not offer direct technical support, we can assist you in contacting the manufacturer to ensure you receive the support you need.
| BRAND | Erichsen |
| Product | NO. 4 - 4,1 mm |
| Internal code | ONR4857004 |
No documents...
Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)
ORDER NO. 0004.01.31 SHEET METAL TESTING MACHINE, MODEL 100
with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)
ORDER NO. 0012.01.31 MODEL 102 SHEET METAL TESTING MACHINE
with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)
Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)
Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 230 mm, gap heights + 150 microns 200 microns (please specify when ordering)
Order No. 0100.01.31 model 463
Sikkens scratching tool
Washability and scrubbing tester
Probe for the model 295/XIV
Sikkens cutting egde
ORDER.NO. 0062.02.31 MODEL 321
Immersion flow cup with nozzle Ø 4 mm
Paint Inspection Gauge
resistivity meter
Brightness meter
Glossmeter
Gloss Meter
(Paint shaker (1400-0H-E5), for use as a dispersing machine for laboratory-color approaches for the determination of dispersion of pigments in accordance with DIN EN ISO 8780-2, to carry out mixing and Homogenisiervorgängen of all kinds, including holding brackets with flange. 2-arm device with lateral supports for receiving containers up to every 7 kg (about 5 liters) Total weight per working side, with the standard motor 5-1816 (1/4 hp) and a built-in mechanical timer (0 - 60 minutes), incl. cross foot and guard (complete chamber), designed according to the applicable EC directives. Power supply: 230 V, 50 Hz)
RITZHÄRTEPRUFGERÄT SCRATCH HARDNESS TESTER 413
Base unit with electric motor (5 U / min) Rotary driven dish (Ø 115 mm) for clamping the test panels max. Dimensions 100 mm x 100 mm x 22 mm or Ø 140 mm x 22 mm. The package includes load arm for receiving the Test tool with a device for radial fine adjustment (Micrometer), 2 weights for the areas 1 N and 10 N, tare with dragonfly, circular level, hand magnifier, screwdrivers and carrying case. Power supply: 230 VAC / 50 Hz (other voltages on request)
SCRATCH HARDNESS TESTER 413, ORDER NO. 0102.01.31
Scratch Hardness Tester
COLOR AND GLOSS METER
with nozzle diameter 4 mm
Cylindrical Mandrel Bending Tester, Model 266 S
SCRATCH HARDNESS TESTER 413
560MC-s obsolete replaced by 0295.01.31
Gloss meter
0295.01.31 Modell 560 MC-X mit einem Messwinkel von 60°
Glanzmessgerät
0218.01.32 nach DIN EN 438-2 und ISO 4586-2 (Kegelwinkel 90°, Spitzenradius 90 μm)
Diamant-Prüfspitze
0218.02.32 nach Clemen (R 1,0 mm)
Prüfspitze
0539.01.32 nach van Laar (Ø 0,5 mm)
Prüfspitze
0539.02.32 nach Bosch (Ø 0,75 mm)
Prüfspitze
0539.03.32 nach ISO 1518-1 (Ø 1 mm)
Prüfspitze